lithium battery forklift 1.5ton 1.6ton 2ton 2.5ton 3ton 3.5t hydraulic electric forklift
Model: CPD
Loading capacity: 1500kg / 2000kg / 3000kg / 4000kg
Load center: 500mm
Lifting height: 3000-6000mm
1) China top brand lithium battery, 80V/150Ah, 80V/202Ah, 80V/280Ah, 80V/404Ah, water automatic filling system is poptional.
2) Mast optional: 3/4m duplex mast, 3.6/4/4.5/5/5.5/6m triplex mast, 3/3.3/3.5/4/m duplex full free mast.
3) Transmission: Automatic/manual;
4) Tire: pneumatic/Solid/non-mark solid;
5) Forks: 1070/1220/1370/1520/1670/1820/1970mm;
6) Attachments: Side shifter, fork positoner, fork sleeve, paper roller clamp, bale clamp, drum clamp, load extender, rotator,
fork clamps, push/pull, etc..
7) Additional: Cabin, heating, fan, air conditioner, high exhaust, paper fold, USB, camera & image, suspension seat, etc.
Wide view
The compact structure of standard wide view frame and hose pulley block makes the operator a better view.
Reinforced components
The maintenance-free wet disc brake system provides excellent brake performance. The compact structure, small deflection, and
dust-proof and water-proof design of the casting steering axle endow the forklift with long service life and working reliability.
Advanced AC motor
Compared with DC motor, the maximum speed of AC motor is higher, which is more compact yet more powerful. With faster start-up
response, the forklift can run at full speed over short dis-tances. No need to replace the carbon brush or diverter, thus saving
maintenance cost.
High quality lead-acid battery
Cost-effective lead-acid battery is adopted, which has the characteristics of high-rate discharge performance, no ignitability,
large temperature window, zero pollution, high recycling rate, and long service life.
Low voltage DC charger
Corresponding low voltage DC charger is provided based on the power of lead-acid battery. Equipped with China national standard
charging gun,butt converter of different specifications are optionally provided to meet various charging specifications.
Characteristics |
Manufacturer | | | XDEM |
Model | | | CPD20 | CPD25 |
Rated capacity | Q | kg | 2000 | 1500 |
Load center distance | C | mm | 500 | 500 |
Power type | | | Lithium Battery | Lithium Battery |
Driving type | | | Seated | Seated |
Wheel base | L1 | mm | 1500 | 1500 |
Tyres |
Tyre type | | | Pneumatic | Pneumatic |
Wheel number(front/rear) | | | 2X/2 | 2X/2 |
Front tread | W3 | mm | 970 | 970 |
Rear tread | W2 | mm | 950 | 950 |
Tyre(front) | | | 7.00-12-12PR | 7.00-12-12PR |
Tyre(rear) | | | 18X7-8PR | 18X7-8PR |
Size |
Front overhang | L2 | mm | 468 | 468 |
Mast tilting angle,front/rear | α/β | ° | 6/12 | 6/12 |
Height with mast retraction | H1 | mm | 1995 | 1995 |
Free lifting height | H3 | mm | 150 | 150 |
Max. lifting height | H | mm | 3000 | 3000 |
Max. height after lifting | H2 | mm | 4045 | 4045 |
Overall guard height | H4 | mm | 2098 | 2098 |
Fork size: length x width x thickness | LxWxT | mm | 1070x100x40 | 1070x120x40 |
Overall length(fork excluded) | L' | mm | 2353 | 2353 |
Overall width | W1 | mm | 1170 | 1170 |
Turning radius | r | mm | 2172 | 2172 |
Ground clearance of mast | H5 | mm | 110 | 110 |
Ground clearance of wheel base center(loaded) | H6 | mm | 105 | 105 |
Right angle stacking aisle width (pallet 1000x1000mm,clearance 200mm) | Ast | mm | 4040 | 4040 |
Right angle stacking aisle width (pallet 1200x1200mm,clearance 200mm) | Ast | mm | 4240 | 4240 |
Lateral fork adjustment Max./Min. | W5 | mm | 1038/200 | 1038/240 |
Performance |
Travelling speed (loaded/unloaded) | | km/h | 12/14 | 12/14 |
Lifting speed (loaded/unloaded) | | mm/s | 320/450 | 320/450 |
Lowering speed | | mm/s | <600 | <600 |
Gradeability (loaded) | | % | 12 | 12 |
Weight |
Total weight | | Kg | 4214 | 4270 |
Battery |
Battery voltage /capacity | | V/Ah | 80/202 | 80/230 |
Lithium Battery weight | | Kg | 715 | 750 |
Motor and controller |
Driving motor power-60 minutes | | Kw | 11 | 11 |
Lifting motor power(S3 15%) | | Kw | 12 | 12 |
Driving motor control mode | | | AC | AC |
Lifting motor control mode | | | AC | AC |
Service brake/parking brake | | | Hydraulic /Mechanical | Hydraulic /Mechanical |
Hydraulic system working pressure | | Mpa | 17.5 | 17.5 |
Note: (1)Detailed information about battery,please contact our salesmen or engineer. |